- HOW TO SETUP RAID 0 IN BIOS INITIALIZE DRIVE INSTALL
- HOW TO SETUP RAID 0 IN BIOS INITIALIZE DRIVE WINDOWS
HOW TO SETUP RAID 0 IN BIOS INITIALIZE DRIVE WINDOWS
The reason I had to change the HDDs into this server was because the Gen8 server the HDDs originated from did not support UEFI booting at all which prevented me from booting Windows to Go, and I did not want to risk any more data loss by installing Windows on top of one of the drives as our servers has exactly 8 hard drive bays. 0 Gbps 7pin Straight/Right-Angle HDD SSD Cd Driver, Cd Driver(s): marvell 88se9230 windows pcie sata card. I don't know which one to adjust first, but i probably won't be able to boot after that. We have bought two NAS devices with a combined total of 8tb each worth of space that will take backups of all our servers. you are right, there is a raid utility i can access during boot up and in the bios is also a raid setting.
HOW TO SETUP RAID 0 IN BIOS INITIALIZE DRIVE INSTALL
Once that was done I was able to install the recovery software and recover a vast majority of the do know what backup software is but unfortunately my company did not care, but now they do. Once booted in Windows to Go I went into Windows disk management which saw all 8 HDDS and activated all of them (They were initially inactive as Windows to Go does not automatically activate HDDs from the host hardware). I then had to change the boot to allow for UEFI to boot the windows to go. The BIOS Setup menus described in this section may differ from the exact settings for. Windows Setup doesnt find the drives either.
However, when rebooting, the drives dont show up in the BIOS. However the Windows SBS 2011 installation tool. Ive enabled RAID in the BIOS and, using the built-in Disk Manager (pressing F8 during Boot), created a new RAID 1 array (using QuickInit - the drives are brand new). I enabled RAID in the BIOS and paired the two drives as RAID 0 using the RAID configuration tool (Ctrl+M). Thanks everyone for the replies and the suggestions. I was able to get almost all of the data back.Īs JoeWilliams suggested I put the controller in JBOD mode which in the HP Proliant server is called HBA mode. Ive attached two Toshiba SSD drives with 256GB capacity each.
0 kommentar(er)
